Quiz Answer Key and Fun Facts
1. To start, gather the materials needed:
One old console television, fish tank, surge strip, 3 prong plug kit, electrical wiring rated for main voltage, On/off switch, electrical tape, wire nuts, fluorescent fixture, handle, 2-3 small hinges for the lid and small wood screws.
What is another term for wire nuts?
2. Next, gather the tools needed:
Circular saw, screwdriver, sander, wood finishing equipment (stain, paint etc.)
In woodworking, what is cutting the wood parallel to the grain called?
3. Carefully remove the back of the television and determine if additional support is needed for the console to handle the weight of a full aquarium.
What is the approximate weight of a ten gallon filled tank?
4. Reinforce the bottom of the console if necessary.
Which would be a not good choice for reinforcement?
5. Dry fit the aquarium in the console and check to see how much room you have from the top of the tank to the inside top of the console. You need approximately 2 - 2 1/2 inches of room to add your florescent light fixture.
The central element in a fluorescent lamp is a sealed glass tub containing mercury.
6. The next step is to create the "lid". Remove the top of the console by cutting it at the seams.
Attach the ______ to ensure the lid can open and close properly.
7. Attach a handle to the lid.
What is a handle typically used on cabinets or closets that just opens and shuts and doesn't need to latch called?
8. Prepare the console for painting or staining.
Which would not be a good method to prepare the wood?
9. Coat the inside of the console with lacquer or waterproof paint to protect it from _______.
10. Finally you are ready to add a colorful background to give your aquarium a conversation-generating presence!
What would you use for the background?
Source: Author
sally0malley
This quiz was reviewed by FunTrivia editor
WesleyCrusher before going online.
Any errors found in FunTrivia content are routinely corrected through our feedback system.